Available in PVC or Plenum rated jacket, each fiber is coated with a 900 micron buffer. Available in high fiber counts and sub-bundled
designs where 6 or 12 fibers can form a sub-unit in a larger fiber cable. Termination does not require break-out kits, and is accomplished much faster than termination of loose-tube cable. Available
in indoor and indoor/outdoor cable. BREAK-OUT (TIGHT BUFFERED INDIVIDUALLY JACKETED 
Available in PVC or Plenum rated jacket. Each fiber is buffered and cabled with tensioned kevlar,
then it is individually jacketed like a simplex cable, and jacketed with an outer sheath. Typically
used in fiber counts up to 24 strands, break-out cable is perfect for severe duty applications, and
it is the most "robust" and easiest of all types to connectorize. Available in indoor and indoor/outdoor cable. JUMPER CORD 
Available in PVC and Plenum rated jacket. Jumper cord is available in simplex, (one fiber) or
duplex, (two fibers), and is usually used in patching applications. The duplex fiber is referred to
commonly as "zipcord", because the design is very similar to lamp cord that can be peeled
apart at the seam. Jumper cord is designed to be flexible without a lot of memory, to work well in patch panels and racks where wire management is a concern.
Each of these styles come in a range of packaging options with different jacketing, varying number of fibers, glass performance options, fire and smoke resistance, operating temperature
ranges, etc... We are expert at determining the right fiber for your application. Please call with
your specific requirements, and we can help to recommend the "right" fiber from the manufacturer that builds the best fiber for your needs. |
or